|
Customer-Specific Isolation Amplifier DK 8000
- Customer-Specific Solutions
Special Input and output range on request - Universal Power Supply for 20 to 253 V AC/DC
Applicable world-wide for all common supply voltages - 3-port isolation
Protection against erroneous measurements due to parasitic voltages or ground loops - Ultra-small-sized housing
12.5 mm housing with plug-in screw terminal blocks - High accuracy
No falsification of measured signal - Protective Separation
Protects service personnel and downstream devices against impermissibly high voltage - Maximum reliability
No maintenance costs - 5 Years Warranty
Defects occurring within 5 years from delivery date shall be remedied free of charge at our plant (carriage and insurance paid by sender)
|
|
DK8000
주문형 고성능 슬림형 신호변환기 Customer-Specific
Isolation Amplifier
DK 8000
절연증폭기 DK 8000은 고객별 산업 신호의 분리 및 변환에 사용됩니다.
The Isolation Amplifier DK 8000 is used for isolation and conversion of customer-specific industrial signals.
입력 |
고객주문 신호형식 | 전압신호
Min ±10mV
/ Max
±1500V
범위내 | 전류신호
Min ±50μA
/ Max
±1A
범위내 |
출력 |
고객주문 신호형식 | 전압신호
Max ±25V
범위내 | 전류신호
Max ±100mA
범위내 |
전원 | 범용전원
20 ~ 253V AC/DC (DC24V
/ AC220V 가능) |
특징 |
주문형
특수 신호형식 입력/출력 매우
빠른 응답속도 최대 80μs, 높은 내전압
4kV
|
- 고객별 솔루션
요청시
특별 입력 및 출력 범위
- 범용 전원 공급 장치 (20 ~ 253V AC/DC)
모든 공통 전원 전압에 대해 전세계적으로 적용 가능
- 3-port 절연
부유전압(Stray
Voltage) 또는 접지루프(Ground
Loop)로 인한 잘못된 측정으로부터 보호
- 초소형 하우징
플러그인 나사
단자 블록이
있는 12.5mm 하우징
- 높은 정확성
측정된 신호의 위조 없음
- 감전보호
허용되지 않는 고전압으로부터 서비스 요원 및 후속 장치를 보호합니다.
- 최대 신뢰성
유지 보수 비용 없음
- 5년 보증
배송일로부터 5년 이내에 발생하는 결함은 무료로 수리
또는 교환해 드립니다.
|
주문형
신호 절연증폭기(Isolation Amplifier) DK8000은 고객의
특정한 산업용 신호의 절연 및 변환에 사용됩니다.
개별화된
솔루션에 관해서 개발팀의 노하우를 제공할 준비가 되었습니다.
이를 통해 가능한 한 가장 짧은 시간에 이미 잘 알려진
드라고(DRAGO) 품질로 고객별로 개별화된 컨설팅을 통해
경제적인 측면을 포함하여 모든 고객의 요구를 최적으로
충족시키는 솔루션을 제공할 수 있습니다.
12.5mm
너비의 슬림형 하우징은 제어반 공간을 절약하고 실용적인
플러그인 나사 단자 블록(Plug-in Screw Terminal Block)은 조립을 용이하게 합니다.
20
~ 253V AC/DC의 새로운 범용 전원팩(Universal Power
Pack)은 DK8000이 모든 주전원과 함께 세계 어느 곳에서나
사용될 수 있음을 의미합니다. 이 장치의 고효율성은 변환기의
자체발열을 줄이는데 크게 기여합니다. 이는 매우 높은
신뢰성과 장기적인 안정성에 반영됩니다.
The Isolation Amplifier DK 8000 is used for isolation and conversion of customer-specific industrial signals.
When it comes to individualized solutions, the know-how advantage of our development team stands ready to serve. This allows us to offer customer-specific solutions with the proverbial DRAGO quality in the shortest possible time; solutions which, as a result of individualized consultation, optimally meet all customer needs, including their economic ones. The slim housing with 12.5 mm width saves space in the switch cabinet and facilitates by the practical plug-in screw terminal blocks the assembly. The new universal power pack for 20 to 253 V AC/DC means the DK 8000 can be used anywhere in the world, with all mains power supplies. The unit’s high efficiency contributes significantly to reducing the unit’s own heat generation. This is reflected in extremely high reliability and long-term stability.
Technical Data
Input
Input signals | Customer-specific technical data as orders (see label) | Input resistance | Current input Voltage input | approx. 25 Ohm (depends on measuring range) approx. 1 MOhm (depends on measuring range) | Overload | Max. 120 % of final value |
Output
Output signals | Customer-specific technical data as orders (see label) | Load | Current output Voltage output | ≤ 12 V (600 Ohm at 20 mA) ≤ 20 mA (500 Ohm at 10 V) | Transmission range | unipolar: –2 ... +110 %, bipolar: –110 ... +110 % | Residual ripple | < 10 mVrms |
General Data
Transmission error | Typical 0.1 % full scale (max. 0,3 %, depends on measuring range) | Temperature coefficient 2) | < 100 ppm/K | Zero/Span Adjustment | Optional | Cut-off frequency -3 dB | Max. 10 kHz | Test voltage | 4 kV AC, 50 Hz, 1 min., input against output against power supply | Working voltage 2) (Basic Insulation) | 1000 V AC/DC for overvoltage category II and pollution degree 2 acc. to EN 61010–1 | Ambient temperature | Operation Transport and storage | –20 °C to +70 °C (-4 to +158 °F) –35 °C to +85 °C (-31 to +185 °F) | Power supply | 20 to 253 V AC/DC | AC 48 to 62 Hz, approx. 2 VA DC approx. 1.0 W | EMC 3) | EN 61326-1 | Construction | 12.5 mm (0.49") housing, protection class: IP 20 mounting on 35 mm DIN rail acc. to EN 60715 | Weight | Approx. 100 g |
Block
Diagram
|
Dimensions
|

|

|
Terminal assignments Wire cross-section max. 2.5 mm², Multi-wire connection max. 1 mm² (two wires with same cross-section)
1 | Input + |
5 | Output + |
2 | Input - |
6 | Output - |
3 | Input + |
7 | Power supply ~ |
4 | Input - |
8 | Power supply ~ |
제품
주문 코드 Order Codes
품목 | 주문번호 | 고객 특정 신호
절연증폭기 (비표준 산업용
신호)
Customer-Specific Isolation Amplifier
색인번호 XXX는 신호조합을 설명하며, 주문사양에
따라 별도로 표시됩니다. |
DK 8000 – XXX |
여기에
표기된 사양들은 예고 없이 변경될 수 있습니다! (Specifications
listed here are subject to change without notice!)
|