드라고 신호변환기      DRAGO Signal Converters

측정, 제어, 자동화를 위한 산업용 신호처리, DRAGO가 합니다.

페이지

Homepage

제품군

Product Line

제품소개

Products

신호변환기 선정 가이드

Selection Matrix

제품 전체 보기

Service Web Portals

내려받기

Downloads

제품 및 구입 문의

Contact

DB6230

Filter Isolation Amplifier DB 6230

 

  • Easy selection of input and output range
    Input and output range for unipolar and bipolar signals can be easily set by using DIP switch
  • Universal power supply for 20 to 253 V AC/DC
    Applicable world-wide for all common supply voltages
  • 3-port isolation
    Protection against erroneous measurements due to parasitic voltages or ground loops
  • Ultra small sized housing
    12.5 mm housing with plug-in screw terminal blocks
  • Selectable cut-off frequency; high accuracy
    No distortion; no falsification of measured signal
  • Protective Separation
    Protects service personnel and downstream devices against impermissibly high voltage
  • Maximum reliability
    No maintenance costs
  • 5 Years Warranty
    Defects occurring within 5 years from delivery date shall be remedied free of charge at our plant (carriage and insurance paid by sender)

DB6230 고성능 슬림형 노이즈 차단 필터 신호변환기
Filter Isolation Amplifier DB 6230

설정 가능한 필터 기능을 이용한 산업 신호의 절연 및 변환

필터 절연증폭기 DB 6230은 양극성 및 단극성 산업용 신호의 분리 및 변환에 사용됩니다.

The Filter Isolation Amplifier DB 6230 is used for isolation and conversion of bipolar and unipolar industrial signals.

입력

0~20mA   4~20mA   0~10mA   2~10mA   0~10V   2~10V   0~5V   1~5V

±20mA    ±10mA    ±10V    ±5V

출력

0~20mA     0~10V

±20mA     ±10V

특성

신호 노이즈 차단, 차단주파수 10Hz   1Hz   0.5Hz   0.1Hz 선택 설정

전원

범용전원  20 ~ 253V AC/DC (DC24V / AC220V 가능)

특징

다양한 신호형식 입력, DIP 스위치로 입력/출력 설정 및 변경
높은 내전압 4kV

  • 입출력 범위 선택의 용이성
    단극성 및 양극성 신호의 입력 및 출력 범위는 DIP 스위치를 사용하여 쉽게 설정할 수 있습니다.
  • 20 ~ 253V AC/DC의 범용 전원 공급 장치
    모든 공통 전원 전압에 대해 전세계적으로 적용 가능
  • 3-port 절연
    부유
    전압(S
    tray Voltage) 또는 접지루프(Ground Loop)로 인한 잘못된 측정으로부터 보호
  • 초소형 하우징
    플러그인 나사 단자 블록이 있는 12.5mm 하우징
  • 선택 가능한 차단 주파수; 높은 정확성
    왜곡 없음; 측정된 신호의 위조 없음
  • EN 61140 (KS C IEC 61140) 규격에 따른 감전보호
    허용되지 않는 고전압으로부터 서비스 요원 및 후속 장치를 보호합니다.
  • 최대 신뢰성
    유지 보수 비용 없음
  • 5년 보증
    배송
    일로부터 5년 이내에 발생하는 결함은 무료로 수리 또는 교환해 드립니다.

필터 신호 절연증폭기(Filter Isolation Amplifier) DB6230은 양극성 및 단극성 산업용 신호의 분리 및 변환에 사용됩니다.

입력범위와 출력범위를 쉽게 선택할 수 있고, 새로운 범용 전원공급 장치와 초소형 하우징 덕택에 절연증폭기는 유연한 사용에 적합합니다. 높은 신뢰성과 방호격리(Protective Separation)는 DB6230을 타의 추종을 불허하는 또 다른 특징입니다.

주문 키를 사용하면 제품 출하 전에 공장에서 조정할 입력 및 출력 범위를 선택할 수 있습니다. DIP 스위치 설정을 통해 언제든지 쉽게 재설정할 수 있습니다. 후속 재조정 또는 측정된 범위 보정은 전면 패널의 제로/스팬 전위차계(Zero/Span Potentiometer)에서 수행할 수 있습니다. 또한 DIP 스위치를 사용하여 차단 주파수(Cut-off Frequency)를 측정작업에 적용할 수 있습니다.

너비 12.5mm의 소형 하우징은 제어반의 공간을 절약하고 실용적인 플러그인 나사 단자 블록(Plug-in Screw Terminal Block)은 조립을 용이하게 합니다. 범위설정을 위하여 DIN 레일에 있는 것을 포함하여 모든 제어장치에 쉽게 접근할 수 있도록 간단한 하우징 래치가 제공됩니다.

20 ~ 253V AC/DC의 새로운 범용 전원팩(Universal Power Pack)은 DB6230이 모든 주전원 공급장치와 함께 전세계 어느 곳에서나 사용될 수 있음을 의미합니다. 이 장치의 고효율성은 신호변환기의 자체발열을 줄이는데 크게 기여합니다. 이는 매우 높은 신뢰성과 장기적인 안정성에 반영됩니다. 전원공급을 모니터링하기 위해 변환기 전면에 녹색 LED가 제공됩니다.

The Filter Isolation Amplifier DB 6230 is used for isolation and conversion of bipolar and unipolar industrial signals.

Due to the easy selection of the input and output ranges, the new universal power supply and the ultra-small housing the Isolation Amplifier is suitable for flexible use. High reliability and Protective Separation are further characteristics that make the DB 6230 unrivaled.

The order key allows you to select the desired input and output ranges to which the unit will be adjusted at the factory before delivery. These can be easily reconfigured at any time by means of DIP switch settings. Subsequent readjustment or measured range compensation can then be performed at the zero/span potentiometers on the front panel. Also the cut-off frequency can be adapted to the measurement task by using the DIP Switch.

The small housing with 12.5 mm width saves space in your switch cabinet and facilitates by the practical plug-in screw terminal blocks the assembly. For range setting a simple housing unblocking is installed which makes it possible to reach easily all control elements on the mounting rail.

The new universal power pack for 20 to 253 V AC/DC means the DB 6230 can be used anywhere in the world, with all mains power supplies. The unit’s high efficiency contributes significantly to reducing the unit’s own heat generation. This is reflected in extremely high reliability and long-term stability. A green LED on the front of the unit has been provided to monitor the power supply.

 

Technical Data

Input

 VoltageCurrent
Input signals
(terminal/switch selectable)
± 10 V, 0 to 10 V, 2 to 10 V
± 5 V, 0 to 5 V, 1 to 5 V
± 20 mA, 0 to 20 mA, 4 to 20 mA
± 10 mA, 0 to 10 mA, 2 to 10 mA
Input resistanceApprox. 1 MOhmApprox. 25 Ohm
Input capacitanceApprox. 1 nFApprox. 1 nF
OverloadVoltage limitation via 30 V Z–Diode,
max. continuous current 30 mA
≤ 200 mA

Output

 VoltageCurrent
Output signals
(switch selectable)
± 10 V, 0 to 10 V± 20 mA, 0 to 20 mA
Load≤ 10 mA (1 kOhm at 10 V)≤ 12 V (600 Ohm at 20 mA)
Linear transmission rangeunipolar: –2 to +110 %, bipolar: –110 to +110 %
Residual ripple< 10 mVrms

General Data

Transmission error< 0.1 % full scale
Temperature coefficient 1)< 100 ppm/K
Zero/Span compensation± 10 %
Filter function 
   Cut-off frequency -3 dB10 Hz,   1 Hz,       0.5 Hz,   0.1 Hz   (switchable)
   Response time T9970 ms,   700 ms,   1.5 s,     7 s
Test voltage4 kV AC, 50 Hz, 1 min., Input against output against power supply
Working voltage 2)
(Basic Insulation)
1000 V AC/DC for overvoltage category II and pollution degree 2 acc. to EN 61010–1
Protection against electrical shock 2)Protective separation according to EN 61140 by reinforced insulation in accordance with EN 61010–1 up to 600 V AC/DC for overvoltage category II and pollution degree 2 between all circuits.
Ambient temperatureOperation
Transport and storage
–20 °C to +70 °C    (-4 to +158 °F)
–35 °C to +85 °C     (-31 to +185 °F)
Power supply20 to 253 V AC/DC,AC 48 to 62 Hz, approx. 2 VA
DC approx. 1.0 W
EMC 3)EN 61326 -1
Construction12.5 mm (0.49") housing, protection type: IP 20
mounting on 35 mm DIN rail acc. to EN 60715
WeightApprox. 100 g
  1. Average TC related to full scale value in specified operating temperature range, reference temperature 23 °C
  2. For applications with high working voltages, ensure there is sufficient spacing or isolation from neighboring devices and protection against electric shocks.
  3. Minor deviations possible during interference

 

Block Diagram

Dimensions

DB6230

DB6230

Pluggable screw clamp terminals
Metal lock for fasting on 35 mm DIN rail
Wire cross-section max. 2.5 mm², Multi-wire connection max. 1 mm² (two wires with same cross-section)

1

Input + current

5

Output +

2

Input - current

6

Output -

3

Input + voltage

7

Power supply ~

4

Input - voltage

8

Power supply ~

 

 

제품 주문 코드   Order Codes

품목

주문번호

신호 필터 절연증폭기
DIP 스위치를 이용하여 입출력 범위 설정 가능

DIP 스위치를 이용하여 필터기능 (차단 주파수, Cut-off Frequency) 설정가능

Filter Isolation Amplifier, Configurable

기본 설정 주문 코드
출하시 기본으로 설정된 입출력 - 입력: ± 10V, 출력: ± 10V
출하시 기본 설정된 입출력을 필요시 변경 설정할 수 있습니다.

DB 6230 AG

입력 및 출력 설정을 지정하여 주문 가능
기본설정 대신 원하는 입출력으로 미리 설정하여 출하 됩니다.
이 경우에도 출하시 지정하여 설정된 입출력을 필요시 변경 설정할 수 있습니다.

DB 6230 AG - XX - XX

입력: ± 5V, 출력: 0 ~ 20mA 으로 설정을 지정하여 주문할 경우 주문번호 예시

DB 6230 AG - 03 - 07

 

신호종류

입력 신호 코드

출력 신호 코드

DB 6230 AG

-XX

-XX

± 10 V

00

00

0 to 10 V

01

01

2 to 10 V

02

-

± 5 V

03

-

0 to 5 V

04

-

1 to 5 V

05

-

± 20 mA

06

06

0 to 20 mA

07

07

4 to 20 mA

08

-

± 10 mA

09

-

0 to 10 mA

10

-

2 to 10 mA

11

-

  

여기에 표기된 사양들은 예고 없이 변경될 수 있습니다! (Specifications listed here are subject to change without notice!)

© Copyright 2004-2024 by DRAGO Automation GmbH

드라고 신호변환기 한국판매원 - 에이콤 (AKORM Corp.)